Announcement

Collapse
No announcement yet.

<--watch this space! Parts fresh from japan

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • <--watch this space! Parts fresh from japan

    THIS WEEKS SPECIAL BLITZ TEMP GAUGE $99 POSTED AUS WIDE

    or

    BID HERE ($79 starting price)------> http://cgi.ebay.com.au/ws/eBayISAPI....m=320562416204


    I have 2 dual guage pod a pillars
    One is from r33, the other a subaru liberty

    $75 ono each, test fits welcome as they may also fit other models
    I dont know if thats overpriced, so feel free to make offers




    top liberty
    bottom r33

    r33 one came with the a pillar itself (or atleast most of it)

    Ive tested these on z20 soarer and a70 supra A pillars, and they are a rough fit ....



    Items that will be made, as time and money allows
    1. JIC lower arm bar (test items in production now)
    2. JIC camber arms
    3. Do luck rear x brace (my copies will be 9000x better than the ebay copies)

    And I may also have 1/4 window seals coming for us (thanks to some help from Boris!)



    Im also happy to organise stuff from japan for you guys at no charge, but you have to pay upfront and if it doesnt work I wont cover the costs, where as with all this stuff, If one doesnt work then its my loss....

    more pics + parts up later

    prices:

    Dual guage pillars = 75+post (one is a good fit the other is so-so)
    safc+sitc+evc-SOLD
    Last edited by B_JAY; 16-07-2010, 07:57 PM.
    Originally posted by coFF33
    Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
    Originally posted by GEEZ20
    quicker than a super car??? what engine are u packing?

    Originally posted by Sports sedan
    7m

  • #2
    B_JAY you sir, are a champion...

    are the SAFC + ITC $450 each? or $450 for two?
    "I was doing fine, right up until mid corner, where I ran out of talent" - DNF racer.

    Comment


    • #3
      Gauges



      I dont know if that pic is the right size or not...
      poobuckets been workin bad for me lately, may do the swap soon....

      All prices incl. post auswide

      $180 Blitz Mechanical Oil Temp 52 mm chrome bezel/carbon face and blacklight
      $100 HKS Boost Gauge 46mm (the size that you would replace and the lighter with)
      $80 *sold* MZ21 Kouki Normal Grill (this was bought for 89jz20, cost was $80 landed, he bought it from the start)
      $350 60mm HKS Boost Gauge & Oil Temp 60mm white face black bezel
      $250 HKS Super AFR in box
      $180 Blitz water Temp Gauge 52mm Mechanical white face chrome bezel
      $ 50 Blitz Boost Gauge (now reads .05 bar instead of .5 on zero, is accurate)
      $180 HKS Temp Gauge 60mm White face grey bezel
      $150 Apexi Boost gauge electronic, has peak/warning/memory and solonoid


      Ive tested all temp sensors and they all seem to work fine (thank fuck!)
      A bit iffy on the blitz boost guage, but all others seem okay, will test boost guages 2moro
      Last edited by B_JAY; 05-07-2010, 11:14 PM.
      Originally posted by coFF33
      Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
      Originally posted by GEEZ20
      quicker than a super car??? what engine are u packing?

      Originally posted by Sports sedan
      7m

      Comment


      • #4
        450 the pair axis...

        the safc is worth about 150 used but this one is BNIB so ?
        the sitc is worth about 250--300 used, as they never made a later one and alot of guys get them to run with the newer safc+safcII
        Originally posted by coFF33
        Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
        Originally posted by GEEZ20
        quicker than a super car??? what engine are u packing?

        Originally posted by Sports sedan
        7m

        Comment


        • #5
          Look at all those Piggybacks/Controllers, are you going to have them all spliced into your ECU harness? should just get a standalone.
          .
          - Complete English z20 Wiring Diagrams
          - All Circuits
          - Every Connector
          - Completely in English.

          Comment


          • #6
            Originally posted by B_JAY View Post
            450 the pair axis...

            the safc is worth about 150 used but this one is BNIB so ?
            the sitc is worth about 250--300 used, as they never made a later one and alot of guys get them to run with the newer safc+safcII
            I dont now what an SITC does?
            please enlighten me?

            BTW im pretty sure my mate is interested. its for an SW20 MR2 gt turbo
            "I was doing fine, right up until mid corner, where I ran out of talent" - DNF racer.

            Comment


            • #7
              OMFG!

              Originally posted by 'B_JAY'
              Hey guys

              I got this stuff today...
              Some of it I bought before I got my new motor+ecu setup, so this is all going up as I no longer need it...




              I am selling them cause I have a microtec ltx12 or sum shit

              I have a VPC/Fcon harness to splice them to, which was the plan, as stated in my thread showroom somewhere

              The vpc and harness are not for sale though
              safc was bought to "clean up" the signal from the vpc
              sitc was bought

              a. just to compliment the safc/vpc
              b. add some tunability (mmmm tuna :drools:)
              c. fill a hole in my hks dash console

              I would reccomend anyone using them to make a harness, and not to touch your loom!
              I can help with this, or even make them and sell them @ cost if anyone needs one


              This thread just wouldnt be right if you didnt ask something that was answered in the first line...
              Last edited by B_JAY; 01-07-2010, 11:59 PM. Reason: just for boris... :p
              Originally posted by coFF33
              Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
              Originally posted by GEEZ20
              quicker than a super car??? what engine are u packing?

              Originally posted by Sports sedan
              7m

              Comment


              • #8
                Super ignition timing controller
                Originally posted by coFF33
                Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
                Originally posted by GEEZ20
                quicker than a super car??? what engine are u packing?

                Originally posted by Sports sedan
                7m

                Comment


                • #9
                  well i gave him the link to this thread so ill know in a sec if he is interested...

                  edit: he cant afford them right now, he may purchase later if they are still available


                  Originally posted by Z2TT View Post
                  Look at all those Piggybacks/Controllers, are you going to have them all spliced into your ECU harness? should just get a standalone.
                  Serious Boris is serious...
                  Last edited by Axis Monkey; 01-07-2010, 10:41 PM.
                  "I was doing fine, right up until mid corner, where I ran out of talent" - DNF racer.

                  Comment


                  • #10
                    yeah no probs....
                    Originally posted by coFF33
                    Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
                    Originally posted by GEEZ20
                    quicker than a super car??? what engine are u packing?

                    Originally posted by Sports sedan
                    7m

                    Comment


                    • #11
                      ok b_jay, lock that EVC down baby, ill hit you with a deposit next week if you want it as it will take me till the week after to get paid to get the rest of it but i WANT THAT EVC! :P
                      My Rides--
                      86 MZ21 soarer --- once loved, but now a cube!
                      88 Ga70 supra --- Overcooled and underpowered but so damn rad
                      94 Vr Commodore --- Can you say single pegger skids?

                      Comment


                      • #12
                        done...

                        I also have another one that I may sell if anyone else wants one...
                        Originally posted by coFF33
                        Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
                        Originally posted by GEEZ20
                        quicker than a super car??? what engine are u packing?

                        Originally posted by Sports sedan
                        7m

                        Comment


                        • #13
                          actually my little brother may use it, its essentially a boost controller yeah? he has a seris 4 rx-7 with an externally gated T04E. ill ask him, if the price is $200 he may want it
                          "I was doing fine, right up until mid corner, where I ran out of talent" - DNF racer.

                          Comment


                          • #14
                            well looks like both may be sold....

                            yes it is a boost controller
                            Originally posted by coFF33
                            Its very easy if your not retarded. If you are retarded and dont like to get dirty and try hard, then forget about it
                            Originally posted by GEEZ20
                            quicker than a super car??? what engine are u packing?

                            Originally posted by Sports sedan
                            7m

                            Comment


                            • #15
                              PM'd... .

                              Comment

                              Working...
                              X