Announcement

Collapse
No announcement yet.

[SA] Manual box - Clutch - Manual tailshaft

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [SA] Manual box - Clutch - Manual tailshaft

    Hey guys,

    This gear is useless to me so readvertising em. Came out from one of my old factory manual GZ20s. Needs a bit of degrease but are pretty good.

    -W58 gearbox and bellhousing to suit 1G
    -Extreme heavy duty clutch and flywheel with plenty of life left
    -Manual tailshaft
    -Everything you need for manual conversion

    Or just grab the lot for $1200. Fairly firm on price and I know there's shit loads of Z20s out there that need some manual loving.



    Last edited by pman; 14-05-2013, 09:14 PM.
    Originally posted by EnFlaMEd
    No exhaust. Cooler piping not connected. Mexicun fitmentl
    ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

  • #2
    Interested in Manual Tailshaft, idk how much the postage would be? to sunshine coast 4556 D:

    Comment


    • #3
      Shouldn't cost much man. At worse 40 bucks I reckon.
      Originally posted by EnFlaMEd
      No exhaust. Cooler piping not connected. Mexicun fitmentl
      ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

      Comment


      • #4
        Fuck this is so cheap! I paid $1500 for everything I needed for my manual conversion and this is all the expensive shit.

        Comment


        • #5
          how much to ship to brisbane 4124 hole lot

          Comment


          • #6
            Hey mate, did a quick estimation on weight etc and tried out 85k which I estimated with a half pallet and came up 261.90. Gave 70kg a shot and was the same. Mind you I'd need to buy a pallet and wrap it.

            Would be much cheaper if you picked it up from the depot. If you're still interested, PM me your suburb and I'll weigh it all up etc for a proper quote.
            Originally posted by EnFlaMEd
            No exhaust. Cooler piping not connected. Mexicun fitmentl
            ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

            Comment


            • #7
              Hrmm.... I did it again another way as 85kg and came up as $75 lol.
              Originally posted by EnFlaMEd
              No exhaust. Cooler piping not connected. Mexicun fitmentl
              ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

              Comment


              • #8
                I had a good experience with smartsend. Got a gearbox/clutch/bellhousing etc. sent door to door for less than $100 and it only took two days, Syd-Adl.
                Soarer Motorkhana
                Soarer Drift
                Soarer Hillclimb
                Promo Video

                Comment


                • #9
                  I might give them a shot, cheers Dean. Ill do what ever possible to noy use e-go after what happened to your turbo.
                  Originally posted by EnFlaMEd
                  No exhaust. Cooler piping not connected. Mexicun fitmentl
                  ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

                  Comment


                  • #10
                    Ok guys, finally got my long awaited shell. I have a full manual conversion now. Pedals, master, everything! Seeing as I have the lot, I do not want to split it anymore. $1200.00 firm for the lot or collect em individually for a hard time.
                    Originally posted by EnFlaMEd
                    No exhaust. Cooler piping not connected. Mexicun fitmentl
                    ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

                    Comment

                    Working...
                    X