Announcement

Collapse
No announcement yet.

Anyone run rein hard exhaust?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anyone run rein hard exhaust?

    I'm looking at the rein hard twin exit exhaust. It is 76mm, with lots of options, such as tip sizes, mid pipe muffler or not, tip baffles or not, etc. I'm looking at the 76mm with twin 76mm tips, mid pipe muffler, no tailpipe baffles. Thoughts?

  • #2
    Something like this, but with no tailpipe baffles.

    Comment


    • #3
      couldn't you go from 76 down to 2 52mm or similar, would give it a tighter sound(no fluffy sound when you back off)

      Comment


      • #4
        http://www.z20soarer.org/forums/show...?t=2657&page=2
        Originally posted by EnFlaMEd
        No exhaust. Cooler piping not connected. Mexicun fitmentl
        ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

        Comment


        • #5
          Those look pretty modded, but I like them

          Comment


          • #6
            I had a full Reinhard exhaust for my S13 and cut off the tips as seen in link and test trialled on the z20. It's the old school quality made ones apparently with the 'Reinhard' badge on the tip rather than the printing.
            Originally posted by EnFlaMEd
            No exhaust. Cooler piping not connected. Mexicun fitmentl
            ☆★ pman's 1jzz20 | skid machine of the brown sort ★☆

            Comment

            Working...
            X