Announcement

Collapse
No announcement yet.

1g turbo removal

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1g turbo removal

    Hi all ,
    What's the easiest way to remove turbos on 1ggte ?
    Cheers

  • #2
    If you have an engine crane, just take the motor out, otherwise your in for some fun. Just start pullen man take some pics so you can put it back togeather if ya need
    http://garageslipway.wordpress.com/sigpic

    Comment


    • #3
      Haha,
      take off the front pipes and undo the turbo bolts from under neath the car.
      You wont be able to get to all of the bolts from the bottom but you will be able to get most.
      From the top you'l need to get 2 of the bolts wit ha spanner.
      the next step its to undo the oil return lines and water lines along with the oil intake lines.
      Then just lift both turbos out together =)
      ^ z20 Soarer international ?? Yer its nice to be here ^

      Comment


      • #4
        The hardest bit is the oil and water lines, make sure you hold your tool straight otherwise you will round the nuts or bolts.
        .
        - Complete English z20 Wiring Diagrams
        - All Circuits
        - Every Connector
        - Completely in English.

        Comment


        • #5
          Originally posted by Tsuyoi Dori View Post
          Hi all ,
          What's the easiest way to remove turbos on 1ggte ?
          Cheers
          Dynamite??
          Moo

          Comment


          • #6
            Originally posted by Looonie View Post
            Dynamite??
            You can say that again !

            One of the nuts on front pipe was rounded , can't get it off . looks like I might as well get a new exhaust system .

            Comment


            • #7
              I have the same problem, my front pipe to turbo outlets nuts are rounded.

              Suggest probably cutting the pipe and pulling the hacked up up when the turbos come out?

              Thanks!

              Cam.

              Comment

              Working...
              X